Your cart is empty.
Your cart is empty.
PRODUCT DESCRIPTION: A surface burner element generates much-needed heat on your electric range. When it burns out, you lose a burner, which can make cooking dinner difficult. Thankfully, replacing a shorted out surface burner element takes only one minute to do. No tools required either. The Beaquicy electric range element directly replaces part number WB30M1and WB30M2
PACKAGE INCLUDE:
2 Pcs*WB30M1 6 Inch Surface Element
2 Pcs*WB30M2 8 Inch Surface Element
EASY TO INSTALL
Installation Tips: The surface burner elements, those metal components that get red-hot and generate heat, are the most important parts of any range. When the elements fail to heat properly, it's time to replace them. It's a simple procedure any electric stove owner can easily accomplish in a few minutes' time. You can usually identify a burnt-out element by blistering or small holes on the element's coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. If the burner works, you know its original receptacle is probably faulty. If it doesnโt work in the good receptacle, the burner is bad and must be replaced. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.
FIXES THE FOLLOWING SYMPTOMS:
Element will not heat.
WORKS WITH MOST BRANDS:GE Hotpoint Ken-more
WORKS WITH THE FOLLOWING MODELS NUMBER:
GE:JBP46GS2,JBP48GS1,JBP46GV1,JBP47GS1,JSP34WD2WW,JSP34WD3WW,JSP34WW2WW,JSP34WW3WW,JSP34WW4WW and more
RB502S1WH,RB502S2WH,RB502S3WH,RB632GS1,RB632GS2,RB632GV1,RB632GV3,RB632GW1,RB632GW2,RB632GW4,RB633GV1,RB636*F4,RB636*J1 and more
Ken-more:99121-8(1988),99138(1988),99141(1988),99148(1988),99151 (1988),99158(1988),
Destiny๐ง๐ปโโ๏ธ
Reviewed in the United States on March 5, 2025
I moved into my new apartment and had sensi temp burners and they sucked , I donโt know if its for safety reasons but I hated them and needed to replace them so I did with these and itโs been such a difference! If youโre having the same issue this is the answer! My food cooks wayyy quicker and it gets HOT unlike the sensi temp that turns off and on, low and high, while you cook even if itโs turned up super high. They fit perfectly except one of the small ones but with some use it ended up staying in the little gap, because at first it would just pop up if it wasnโt being used even after being pushed in completely but other than that gold. I definitely appreciate these .
Amanda R
Reviewed in the United States on March 22, 2025
These replacement coils fit perfectly in our Hot Point stove
Mollie Leonardini Coe
Reviewed in the United States on March 20, 2025
These heating coils allows the user to heat up veg oil in order to deep fry some food items.
Brenda B.
Reviewed in the United States on March 28, 2024
After 24 years of daily use, my GE stove burner almost caused a kitchen fire. I use my stove daily and it still had the original burners on it. I was making a pot of soup on the stove and noticed a small stream of smoke coming from under the pot. Removed the pot and - I guess with more air getting to it - the burner flamed on one of the rings. Actually, it more than flamed, it could have started a serious fire. I turned the burner off and grabbed a box of baking soda (I usually keep a large box in the pantry) and dumped it on the burner. Cleaning up, I noticed the burner was obviously wearing and there was a hairline crack where the flame started. ~ So what I've learned is that burners wear out and should be replaced after a number of years of use. ~ I found these burners for a great price and they arrived promptly. ~ I did have a bit of an issue fitting them into the stove, thought maybe I ordered the wrong size. But no, they are the right size. It did take me a few minutes of wiggling to make them fit properly. ~ Now I know this sounds crazy, but no directions. And really.... why would someone who knows how to use a stove need directions to replace burners? A very simple process. But I feel that there should have been a card or something to let me know that the first time I used the burners they would smoke up. They obviously have some sort of finish on them, I'm not sure if I should have wiped it off with a damp sponge, but I didn't realize there was a finish so I didn't do that. I just put them in and turned the stove on to see if they worked. They all put out a bit of smoke.... which is no problem if you are expecting it. It burned off in about a minute. Other than that, they deserve 5-stars overall.
Lee R
Reviewed in the United States on March 28, 2023
These are absolute crap! They were crammed into a small box with a thin bubble wrap envelope. They were so smashed in that one of them punctured the box. All 4 elements had bent prongs. The large elements don't look like they are the same make as the small ones. Also, they don't fit, I tried unbending the least bent prongs just to see. Description said they would fit for a Hotpoint, I measured the size as well. Even if they did fit I wouldn't feel safe putting these in my stove due to how badly the prongs were messed up. Both of the large elements also have wear marks on them as tho they'd been used before.I'm really not happy with this at all.
Recommended Products
