Your cart is empty.
Your cart is empty. Honeywells 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).
The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the systems receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke, virtually eliminating nuisance alarms.
Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist.
All models also feature a restorable, builtin, fixed temperature (135F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41F.
Rory
Reviewed in the United States on May 18, 2024
This Honeywell 5800 Heat/Smoke detector works very nicely and is very helpful for life safety i a bad event.
Subjectus
Reviewed in the United States on January 1, 2024
This is an expensive smoke detector. But, it is worth the money because it ties into my alarm system. Besides smoke it is also a temperature detector. It will let my alarm company know if it gets below freezing or if it gets too hot. I had a regular smoke detector, but it is in my little place in the country, so if it went off when I was not there no one would know. Now, with it hooked in to my alarm system I will be notified if it ever goes off where ever I am. Piece of mind and safety too.
GK5040
Reviewed in the United States on November 13, 2022
I have a Honeywell Lyric alarm system in my house. I got this detector to add to my system. We decided to add a smoke detector in the garage because we charge an electric scooter out there and you just never know. It wasn’t code back in 1995 to put a smoke detector in the garage but the more we thought about it we decided it was important to add one there and hence this purchase. It was shipped in one day and I had it programmed and installed in 10 minutes. It came with a CR 123 battery and well written instructions for Installation, programming, set up and maintenance. This is a high quality heat and smoke detector that is NFPA approved and UL listed.
FL Tech Guy
Reviewed in the United States on October 26, 2019
Already had these in my house and they work great but wanted to add more. For the most part easy to install but here are a few tips that helped me:-If your alarm is monitored, be sure to call and have it put on "test".-Some videos say to put your panel in programming mode and then open the cover on the smoke alarm which sends a signal and programs it. In my case it programmed the tamper alarm (opening the cover) as if that were the smoke alarm. It's better to program it manually with the code on the unit.-Keypad programming is not fun on many systems including mine. If you have phone app or computer access to your system, try one of those. It's much easier!
Jeffery H.
Reviewed in the United States on January 5, 2019
This is a solid product and easy to install into the Lifeshield security system. it took me less than 10 minutes to power the device up and connect it to Lifeshield AND mount the detector!I wanted to ensure that they were tested, so I called Lifeshield and they put my system into test and the units worked perfect.I highly recommend this unit and can confirm that it is compatible with lifeshield.
Donald Gariepy
Reviewed in Canada on January 12, 2016
great as describe
Recommended Products
