Your cart is empty.
Your cart is empty.Product Description
Function
Ball Joint Press Kit removes and replaces most of sizes of press-fit ball joints found on domestic and import rear wheel drive cars,like fit for Ford, GM and Dodge 2 and 4 wheel drive pickups, vans and SUVs
Ball Joint Reomoval Tool is constructed from heavy-duty forged carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion
Ball Joint Tool is designed with interlocking and interchangeable attachments for an effortless removal/install process
Adjust Anchor Pins
1. To remove the brake anchor pins, remove all lock ring retainers from the Brake Anchor Pins.
2. Position the Ball Joint Press over the brake spider.
3. Tighten the Jackscrew until the anchor pins can be removed.
4. To install the brake anchor pins, insert the brake anchor pins. Then reinstall the lock ring retainers on the brake anchor pin.
5. Unscrew and remove the Ball Joint Press.
Dis/Assemble a U Joint
1. To disassemble a "U" joint, remove any external and/or internal lock rings.
2. Position the Ball Joint Press around the drive shaft yoke and tighten the Jackscrew until the first bearing is removed.
3. Reposition the Ball Joint Press and remove the second bearing.
4. To assemble a "U" joint, clean all dirt and oil from the yoke area.
5. Align the replacement bearing and Ball Joint Press as straight as possible over the yoke. Press the replacement bearing into the yoke, and reassemble the external/internal lock ring.
6. Reposition the Ball Joint Press and second replacement bearing as straight as possible over the yoke, and press the bearing into the yoke.
7. Reassemble the external/internal lock ring.
Installation a Ball Joint
1. Assemble the Ball Joint Press over the vehicle's control arm. Select the correct size Receiving Tube, and position it under the vehicle's ball joint.
2. Place the Removal Adapter between the Receiving Tube and the Jackscrew.
3. Then, place the Installation Adapter between the top of the ball joint and the Ball Joint Press.
4. Tighten the Jackscrew until the Receiving Tube contacts the vehicle's control arm.
5. Check the alignment of all the Ball Joint Kit parts, and continue tightening the Jackscrew until the vehicle's ball joint is removed.
Remove a Ball Joint
1. Clean the vehicle's control arm, and coat the inside diameter of the control arm with a light lubricant.
2. Insert the replacement ball joint as straight as possible into the vehicle's control arm.
3. Assemble the Ball Joint Press over the vehicle's control arm. Select the correct size Receiving Tube and position it on top of the vehicle's control arm.
4. Place the Installation Adapter between the Receiving Tube and the Ball Joint Press. Then, place the Removal Adapter between the ball joint and the Jackscrew.
5. Check the alignment of all the Ball Joint Kit parts. Then, tighten the Jackscrew until the vehicle's ball joint is firmly sealed.
Package Include
1PC Center Plug: OD 7/8"
1PC "C" Frame Press
1PC "C" Frame Screw
1PC Install Adaptor
1PC Remover Adaptor
1PC Receiving Tube: 2-1/4" X 3"
1PC Receiving Tube: 1-3/4" X 2-1/2"
1PC Receiving Tube: 1-3/4" X 2"
1PC Receiving Tube O.D. 2-1/2"", I. D. 2-1/4" Length 3/4"
1PC Receiving Cap Adaptor O.D. 2-1/4", I. D. 2" Length 2"
1PC Remover Installer O.D. 1-7/16", I. 3/4" Length 1"
1PC Receiving Cup O.D. 2-1/2", I. D. 1-1/4" Length 1-1/2"
1PC Receiving Tube O.D. 2-3/4", I. D. 1-7/16" Length 2-1/4"
1PC Receiving Tube O.D. 3", I. D. 2-3/4" Length 2-1/4"
Yannick
Reviewed in Canada on March 30, 2025
This kit is very good, it contains all the accessories from my name brand tool set and the quality is comparable. For a kit of this price, I'm very impressed. Back in time I did pay 3x the price of this one.
shane
Reviewed in Canada on April 30, 2024
Weak material but all the cups very strong, lots of sizes, I’ve changed mk4 Jetta control arm bushings and 4 sets of Jeep compass bushings, just buy a good quality jaw tool to replace cheap cast one in the kit
watatow02
Reviewed in Canada on June 3, 2023
produit tres resistant et l'expedition a été tres rapide, maintenant je suis équipé pour changer les ball joints moi meme.
John
Reviewed in Canada on June 11, 2023
All parts were there and worked well
Franky21
Reviewed in Canada on May 5, 2023
N'a pas eu à l'essayer encore, mais la vis sans fin, vis dans la clam en C avec déjà un lousse plus grand que normal, donc à mon avis, on n'est mieux de ne pas trop lui donné de misère pour ne pas scrapé les filets.
r valois
Reviewed in Canada on August 29, 2022
outils de bonne qualité a tres bon prix
Jacques Lamontagne
Reviewed in Canada on June 25, 2022
The media could not be loaded.
Jack
Reviewed in Canada on December 26, 2022
Great for the price
Recommended Products