Your cart is empty.
Your cart is empty.Product Description
Product discribtion
Dekeliy Professional 2 Pack Adjustable All the Angles Covered Miter Shears
1. The kit of miter shears,22.5-135/45-135 degree adjustable, designed with an enhanced slider design that locks the angle securely in place, Dekeliy profesional mitre shears bring safety and easiness to work. The blades are made of rust-resistant precision stainless steel to provide a clean, accurate cuts of less than 1/2 thickness.ALL WOOD WITH A THICKNESS EXCEEDING 0.5INCH（12.7MM）AND ALL METALS CANNOT BE CUT.
2. One of the multi angle miter shears cutter can cut different angles of 45°, 60°, 75°, 90°, 105°, 120°and 135°,the other can cut angles from 22.5 to 135 , from 22.5°, 45°, 90°,112.5°and 135°,They are satisfied quarter round cutting tool.
Product Innovation
1. Extremely well built and durable
Made of SK5 steel material, plated with hard chrome and heat treatment to HRC52,solid and work great.They do precise cuts in quarter round wood molding.This set of hand tools is not only an excellent trim cutter hand tool, but also an outstanding shoe molding cutter.
2. Cut through cleanly and easily
The blades are quite sharp and cut very cleanly,no compression at the cut,when miter shears for wood.
3. A Separate Pair of Miter Shears with 4 Extra Blades
This is a very complete kit, you will get two styles of miter shears for different angles and 4 replacement blades,they can satisfy any DIY you want.
Including
- One miter shear with 45 to 135 degree adjustable
- Another miter shear with 22.5 to 135 degree adjustable
- Four extra blades
- Packing box
Wide Application of Dekeliy Miter Shear Cutter,Suitable for Cutting of Various Materials,Not Suitable for Cutting Steel
To give you a better idea of which materials can be cut, we have listed them below:
Chamfer, wood carpet,wood trim molding,shoe molding,molding trim,PVC edge strips or plastic edge strips, thin wood veneer strips，PVC pipes, PVC Trunking, THICKNESS LESS THAN 0.5 INCH wood strips, Dowels &Rods,Shoe Molding&Quarter Round, Wood trims, Rubber Strips, cutting for semi-circular strips, quarter round strips, etc.
Dwayne C
Reviewed in Canada on September 4, 2024
I bought these to help with kitbashing my old sci-fi models. Really improves my accuracy and consistency on angled parts, plus keeps my fingers safely away from blades :) Leaves a bit of a burr which comes off easily. Very easy to use. Quite happy with my purchase.
Latino564
Reviewed in Canada on September 1, 2024
This is a great product, I used this to cut 400 linear ft of quarter rounds and I still have not needed to switch the blade. This made my work faster and easier. The only suggestion I have for this amazon product is to improve the rubber cover handle because I did find that they broke off after completing the work mentioned above. I would still highly recommend this product.
S C
Reviewed in Canada on August 26, 2024
I wanted to replace my mouldings throughout my house - this was so helpful as not all corners are the same. Easy to hold in my hand as I worked. With having 2 shears, my son was able to help to make the job go faster!
Paul -André Sonier
Reviewed in Canada on August 20, 2024
I am no expert but this product did impress me , help me to cut in a perfect angle that I usually have a hard time with. Very steady product that will last me for a wild, and at a great price
L.Longhurst
Reviewed in Canada on July 31, 2024
Shears work well, lock into angle you want without any problems. They are for lighter material no wood quarter round.
Mr Badger
Reviewed in Canada on July 3, 2024
Purchased these for a job that involved a lot of quarter round. They lasted about half the job. There is way too much play in the hinges and on top of that the aluminum angle plates bent on both sets.They may work for plastic trim but I do not recommend for wood.I would NOT buy these again.
stacey Meagher
Reviewed in Canada on July 27, 2024
Not great, hard to use. Don’t know if I maybe just wasn’t strong enough to cut or if they weren’t sharp. Also it doesn’t stay perfectly at the angle you set it to, so it’s always a few degrees off.
PK@CA
Reviewed in Canada on March 4, 2024
I was looking for some shears to do a couple of projects with some pine strips and this looked like an ideal set to be able to do the job.It came in a set of two plus and I like the option to be able to do angled cuts. I'm going to compare them separately as they performed slightly differently.Starting with Shear A, it is longer and has a thicker base plate. The angles are pretty basic, and the hand grip is relatively comfortable. However, it takes a bit of effort to get your hand over the cutter due to the thicker base. It seems to be flatter than the other shear, which is good because your cut will be a little straighter on the vertical. It compressed the wood somewhat, but still cut all the way through. I also tried cutting some high-density foam, and it worked quite well. The angles are selected easily just by twisting the base, but it takes a little getting used to. The angles were fairly accurate, and it could be used for larger trim pieces.Shear B, on the other hand, has a thinner plate and a shorter grip. It doesn't have as much cutting power as the larger one, but it still performed well. However, the base is not flat because of the manufacturing process, so the vertical cutting is not accurate. Things tended to move around, and so the cuts are not accurate. Both shears did quite well with cutting PEX tubing. The downside of both shears is that you don't have much in the way of selecting angles, but they work well for pretty basic cuts. They come with spare blades, which is a nice little bonus. Shear B is a little bit nicer in the hand and seems to be better suited to smaller items. The angles are well-marked on both, and for basic trim work and small projects, it's an ideal set. However, if you're looking to do picture framing with high accuracy, you're better off getting a more professional set.They seem to be sold under several brand names, so shopping around is a good idea to make sure you're getting the best price.As a set of two, it's a fair price. Shear A gets four stars, and Shear B gets three because of the quality of the construction. For the set, four stars seem to be about right. Ultimately, I think I'll be using this mostly for cutting plastic and rubber tubing for the various projects that I do and occasionally for trim work.
Recommended Products