Your cart is empty.
Your cart is empty.Shurflos Pre-Pressurized Accumulator Tank smoothes water faucet pulsations and reduces pump cycling to keep water line pressure up and pump motors cool. The Shurflo accumulator tank reduces plumbing system noise, increases the life of your pump and saves battery power. Coupler fitting is included. 1 year limited warranty.
watenin
Reviewed in the United States on September 18, 2024
I like what it does for the system, I had considered adding an expansion tank similar to what is on my RO filter system in my home. When looking I saw that SHURflo has a product that does what I was looking for. I will say I would have liked a larger tank for more quiet flow at night, which is why I started looking in the first place. The compromise of small for RV means it doesn't really deliver enough pump-off flow for toilet flushes, in my experience any way.
Client d'
Reviewed in Canada on August 5, 2024
Fait le travail
GNB
Reviewed in the United States on July 7, 2024
After the simple installation, there is No More water surging in the camper. Smooth operation and the pump runs with less cycling. However, the unit arrives with No pre-charged Pressure as stated in the instructions that came with it. You have to pre-charge it on the rear charging valve. I pumped mine up to 35-PSI and all works great !!
gabrielle
Reviewed in Canada on July 27, 2023
INDISPENSABLE pour ton circuit d'eau dans ta Van ou ton RV
Brain
Reviewed in the United States on August 7, 2022
Worth every penny! Before I installed this I had PEX piping plumed directly to the water pump. That probably contributed to the loudness of the pump cycle and the vibrations and clattering in the plumbing system. Once I installed this accumulator I used a flexible pipe to connect the pump to the accumulator. I’m sure that helped with the noise and the clattering. However my pump cycle was also loud and cycled constantly to keep the pressure in the lines. Once this was installed the pump cycle is much less and the noise is barely noticeable!Installation was a breeze. It can be mounted in multiple different was according to the directions. One important fact is that it DOES NOT come “pre pressured”. It’s an easy fix though. Just use a tire pressure gauge and pressurize the accumulator just over your pump activation pressure.Highly recommend this!
DanW
Reviewed in Canada on August 19, 2021
Installed into my 2015 RPod 179. Don’t forget to get the other kit (2 flex hoses of which I only used one for the inline install) for silencing. Combined it took the water hammering vibration down to a very reasonable low hum. Worth the investment for the extra noise reduction.
marco magaña
Reviewed in Mexico on July 5, 2021
de buena calidad ny llego a tiempo
Gilles Aminot
Reviewed in Canada on September 4, 2020
Installed in my camper. Works well. Pump doesn’t cycle during the nighttime anymore. Water pressure is more consistent and pump is way quieter now also. (I’m guessing this is because of the flexible braided hoses I used to connect it to the water supply line).
Kyle Oh
Reviewed in Canada on November 24, 2019
Purchased and installed to alleviate the constant pump cycles in our holiday trailer. This allows the user to be able to place taps on very low flow without the pump cycling and struggling. The install was easy and was easy to find suitable hoses and connections for. I expect this will help with pump life as well.
J. Dek
Reviewed in the United States on July 21, 2018
This thing is great. First it has stopped all of my pump surges when I try to run a small amount of water or a small flow of water. The pump will still come on but not until you use the 7 ounces of store water under pressure held in the tank. The second thing that worked out for me was the way I installed it. By chance I had just enough room on the outlet side of my pump for installation. Using the double coupling that came with the tank installation was fast and easy, and leak free first try. Because the tank connection port height was lower than my pump outlet I used 2 pieces of rigid plastic tube to raise the height of the tank and screws long enough to extend through the mount of the tank, the length of the plastic tube and 1 inch into the wood below. I went in the RV to check and see how this thing was going to work. Not only did it work like an accumulator tank should, but because of the way I mounted it, it removed 90% of my water pump noise. I love it. Just as a side note I used the factory pressure and have had no problems from the low lying areas of the Atlantic Coast to the heights of the Rocky Mountains.
Dave and Kathy
Reviewed in Canada on July 2, 2018
We bought this for our cottage based on the mostly positive reviews posted. Yes, it actually does work. In our case, the water system RV pump was constantly cycling on and off every few seconds whenever we ran the water. This eliminated that completed. It doesn't have much capacity, but it's enough to smooth out the flow. Also, we installed a braided SS hose on the outfeed side of the accumulator and overall the pump noise is reduced to about half of what it was. We recommend this.
Fafane123
Reviewed in Canada on September 10, 2017
I though about it for some time, wasn't sure about the usefullness of this thing but wow, turned out to be one of those great buy!!!Installation was easy but I however couldn't use the included "pump to tank adapter". I installed it away with some breaded nylon hose to further isolate the pulses of the pump! It allowed me to make my original noisy thing next to silent! Can't hear it now with regular conversation, have to actually listen to it to notice when it starts!!! It's also cool at night after a quick pee to be able to flush and wash you hands without the need for the pump to start!We love it!
FrequentEShopper
Reviewed in Canada on July 23, 2017
Works fantastic. Improved flow, less cycling of the pump especially on low tap setting. Overalll pump is significantly quieter for my install. With the included connector install was a breeze.
Recommended Products
