Your cart is empty.
Your cart is empty.The Sanus Classic Mlt14 Is A Tilting Wall Mount For Most 37 Inch To 80 Inch Flat-Panel Tvs Up To 130 Lbs. Virtual Axis Technology Allows 10 Degrees Of Tilt Motion With The Touch Of A Finger To Help Reduce Glare. Lateral Shift Ability Makes It Easy To Center The Tv On The Wall, Even With Off-Center Studs. Locking Mechanism Holds The Tv Securely In Place On The Wall Plate; Add A Padlock (Sold Separately) For Additional Security. Comes Pre-Assembled For A Quick And Easy Installation. Ul-Listed For Quality And Safety Assurance.
Julia
Reviewed in Canada on September 9, 2024
Does what I need it to! I had someone else install it for me but it was quick and seemed easy. It hasn’t had any issues and works just as I need it to. This is a decent, basic mount for a great price.
Tanya
Reviewed in Canada on May 6, 2024
This stand is a premium quality stand, easy to assemble and mount. Highly recommend.
NYC2Rosemount
Reviewed in the United States on December 9, 2024
The media could not be loaded.
Raluca S
Reviewed in the United States on December 2, 2024
This was easy to install. It is a simple design, low profile, and sturdy. I love that I was able to slide the TV (left/right) until it was centered just perfectly.
Travis
Reviewed in Canada on October 13, 2024
It is a great wall mount. Would have put it up my self but didn't have the drill the go through brick but looks great above the fireplace. It is a very easy to install mount
Amine
Reviewed in Canada on October 3, 2023
Sturdy and extremely easy to install
gary
Reviewed in Canada on October 27, 2023
Great qualityAt a great price was about to spend four times as much money on something I did the same thing I’m hanging at 75 inches TV off of this . it was easy to assemble . came with all the screws for any job -concrete -brick - drywallA word of advice set the angle before you hang the TV it’s a little difficult to get at after the TV is on the rail .It’s been two months and not a problem
Damon
Reviewed in Canada on September 10, 2018
This was my first wall mount I have ever purchased and installed.It was for a 51" plasma which is quite heavy so I wanted one that was UL listed.I wanted a 1-piece mount so that eliminated many of the cheaper mounts.Based on my stud spacing, I also needed one I could slide the tv over a few inches.This one fit the bill. It is very sturdy and easy to install. Having the straps to release the bottom clips makes it very easy to install and remove the tv rather than having to try to squeeze behind with a screwdriver like many other mounts. The adjustable tilt works well and I don't have to reach behind to use it.
Carlos Macias
Reviewed in Mexico on December 5, 2018
Muy buen producto...!!!
eric m palmatier
Reviewed in the United States on April 15, 2018
I've mounted several TVs over the years and this bracket is definitely one of the easier brackets to install. What makes this bracket easier than some others is the bolt holes that span the entire width of the bracket. This helps in adding flexibility to where you mount the bracket, ensuring you can hit two studs and still maintain positioning for where you are trying to mount the TV.The bracket is much more low-profile than my other Sanus tilting wall mount, which is nice. For whatever reason, the tv looks less obtrusive when its closer to the wall, versus 3+ inches off the wall. The tilting action seems smooth, but lets be real, once you find that perfect angle, you're never going to touch it again. Just one word of advice, tighten up the locking nut on the two brackets before you hang the TV. Not too tight, but snugg enough so that when you set the angle the TV doesn't want to droop back down or settle up (in a more parallel position with the wall). The bracket seems very sturdy and well built. I was able to do a pull-up on the bracket after it was mounted on the wall and it didn't budge (just make sure you're in two studs!).If I had any negative comments to make about this bracket, it would be the lack of leveling screws. Some brackets have the option to level the TV after the fact by tightening screws that are on top of the brackets. This is helpful if the bracket is not perfectly level, or if you are mounting over a fireplace. There tends to be more then just one "level line". You have the mantle (which may or may not be level), the ceiling which may or may not be level, and finally you have true level. (Note**doesn't matter if the Earth is flat or spherical). so the additional of after-the-fact leveling screws would help in maybe splitting the difference to make the whole install look a bit better.I'm still giving the bracket 5 stars because its well built, comes with everything you could need hardware wise, and does everything it says it will do. Kudos to Sanus.
All around Swell Guy
Reviewed in Canada on January 28, 2017
Very simply install, very sturdy mount, and perfect for a close fit to the wall. 2 brackets attach to the back of the TV, then mount the main bracket to the wall with 4 lag screws. Then simply lift the TV onto the mount which hangs by the top rail on the wall bracket and a quick attach, spring loaded fasteners lock it in place on the bottom. Couldn't be more simple!!
Tim
Reviewed in the United States on April 18, 2017
This is a great mount for 16" studs. I hung it this weekend and the 26" width gives you some good flexibility with positioning. With 24" studs you may want a slightly wider mount. I used it to hang a 55" Samsung flat screen with VESA 400 mounting holes. I have about 6" range to slide the TV left or right from center with that setup, so was able to position the TV exactly where I wanted to.The included directions were clear and easy to follow, even specifying the proper drill bit to use for pilot holes. Their is a lot of TV mounting hardware included, unfortunately TV's vary so much that the screws I needed were not included. I don't blame Sanus, there's just too many configurations to try and anticipate. I was able to quickly pick up what I needed (M8x45mm) at Lowe's. I recommend looking at your TV instructions for mounting to see what screws you will need ahead of time to be prepared.I debated between this mount and some cheaper high-rated options for a few days, but ultimately I decided that a single steel mounting plate was the safe way to go for a little more money. If you're spending $1k+ on a TV, don't skimp on the details. Having a single mount plate is sturdier, and easier to get level.The two arms that connect to the back of the TV are well designed with a spring loaded safety release at the bottom. I attached them per my TV's instructions and was able to attach the TV on the mounting plate easily. The spring loaded clips snapped right into place. The TV can easily slide side to side still, which is a plus/minus. I would kind of like a set screw to keep my kids from accidentally bumping it to the side once I have the position set.Angle adjustment is pretty easy, there are two screws with knobs you can turn with your hands. You probably want to set those to your anticipated angle at a moderate tension before lifting the TV into place. Reaching behind the TV to adjust the knobs after it's on the wall is a tight squeeze if you have large hands.The TV is so close to the wall that there isn't a lot of room for cables or things behind it. I was able to get a small power strip and my TV only has a single cable that comes out the back horizontally and runs to an HDMI hub, but if you had a bunch of cables to attach after it is on the wall it could be a challenge. Especially if the cables come straight off the back of the TV. You probably want to plug in as much as possible before lifting the TV into place.Once you get everything up it looks great.
Customer
Reviewed in Canada on September 30, 2016
Worked perfectly for my 75" Samsung with VESA 400x400 with lots of room to adjust left and right. Wish it was closer to the wall, ended up being a little more than 2 inchs off. I had to use the plastic standoffs due to my TV having recessed holes even though Samsung sent their own spacers with the tv for the holes, the provided screws were not long enough. Tilts well to reach connections.
Recommended Products
$215.99
$ 71 .28 $71.28
$75.60
$ 35 .27 $35.27