Your cart is empty.
Your cart is empty.Amazon.ca Product Description
Conserve water and improve the efficiency of your current RO with the Watts permeate pump with installation kit. This unit comes with fittings needed to install to your standard RO system. Fittings are quick connecting for ease of installation. The permeate pump allows RO systems to work better in low pressure applications. It also improves the efficiency of the RO so your tank will fill faster, as well as reduce the rinse water volume during production. Compatible with all Watts Standard RO systems (not to be used with the Watts Zero Waste RO). This unit will also fit all standard RO systems on the market. Improved water quality, faster and at higher delivery pressure. Non-electric system.
From the Manufacturer
Conserve water and improve the efficiency of your current RO with the Watts permeate pump with installation kit. This unit comes with fittings needed to install to your standard RO system. Fittings are quick connecting for ease of installation. The permeate pump allows RO systems to work better in low pressure applications. It also improves the efficiency of the RO so your tank will fill faster, as well as reduce the rinse water volume during production. Compatible with all Watts Standard RO systems (not to be used with the Watts Zero Waste RO). This unit will also fit all standard RO systems on the market. Improved water quality, faster and at higher delivery pressure. Non-electric system.
L.J.
Reviewed in the United States on March 22, 2025
Worked well for 5 months then died. No one has returned my emails about a replacement!
dale m.
Reviewed in Canada on August 8, 2023
Like it ability to save water...since we are on a septic system. I've read complaints of this being noisy...❓..to stop this...I have taped the discharge hose to under part of sink...wa-la..silent.
Sportsmen Outdoors
Reviewed in Canada on January 13, 2023
Came with all the fittings needed to install.
gordon
Reviewed in Canada on April 15, 2021
honestly you dont need an installation kit if you already have some leftover 1/4" tubings and the RO system is using 1/4" tubeworks. It works great with ispring rcc7 70GDP, installation is easy (just follow ispring or the included guide). It cuts me pure water to waste water ratio from 1:4 to 1:1.5, yes it clicks but unnoticeable unless you are near kitchen.
Gramps586
Reviewed in Canada on February 7, 2019
I love this little pump. I installed it about a year ago and it runs quietly under the counter as if it’s not even there, but ozmosis water pressure is much stronger and we get lots more water production then ever before!
Jordan W.
Reviewed in Canada on July 18, 2017
Great product. Increased flow from R/O to fridge. Happy now
Customer
Reviewed in Canada on May 11, 2017
I added this pump to my existing APEC RO -90 system because of my low water pressure (30-50 psi). The pump came with clear instructions and was very simple and easy to install. It completely fixed the low pressure problem and now the RO unit works perfectly.
D. W. Venema
Reviewed in Canada on February 24, 2016
As advertised, it does increase productivity while decreasing waste water. I have also found that my water pressure at my tank has increased.
BigDaddy
Reviewed in Canada on August 31, 2014
Bought this as a replacement pump, installation was straight forward and the pump works great. The click for this one is slightly less than the one I had replaced despite being the same pump, so there may have been improvements over the years to reduce the sound, though there is still the identifiable click of a permeate pump. Delivery was earlier than advertised and came Canada Post, which is always easiest for delivery/pick up for me.While I was using as a replacement, which meant I used less of the instructions and install kit, everything was there for someone who does not have this as part of their RO system and the instructions looked straight forward.
Goldenpiggy
Reviewed in the United States on January 20, 2014
I installed the Watts 5-stage manifold RO system with the booster pump for my parents. The system works great and has plenty of pressure for the fridge icemaker and faucet, and recovery rate is super fast compared to no booster pump. However, my parents complained that the darn thing wastes so much water in the process. I added the permeate pump (keeping the booster pump) and amazingly water consumption is reduced by at least 5x, if not more.The permeate pump is purely mechanical and generates quite a bit of racket and vibration. I found it was easier to mount it on a solid piece of wood. Depending on how you installed the RO system, the included tubings may not be long enough.Well worth the price.
diy
Reviewed in the United States on September 21, 2013
I installed the pump with my WP-5 system. Instructions are easy to follow, I like the diagram since it is very straightforward. When the pump is working there is a clicking noise coming from it every 2 seconds also. But it is not too bad because it is only noticeable when I am in the kitchen. Filling the tank seems to be quicker than without the pump. the included tube fittings are of good solid quality.
RInwards
Reviewed in the United States on February 7, 2013
UPDATE: about a year in this unit failed - it stopped clicking, my pressure dropped, and I could taste a difference. I contacted the manufacture and they recognized an issue (failed spring?) - I paid like $5 to ship it to them and they sent back a new or referb (no idea) within a couple days! I was impressed. Hopefully new one lasts longer - they said a change to the spring so it should.This kit was excellent - everything I needed and spare. Instructions were well done. I'm not sure how much better the pressure and speed of fill is yet, nor is durability clear.Update:1) if you are purchasing to boost your pressure (as I was from well water), do not plumb with the auto shut off valve. The auto shut off valve limits your max dif pressure. Plumb with the Permeate pump only, no shut off valve. I went from ~40 psi on the 65 psi well to ~62 psi. Great pressure now and actually fills my 10 gallon tank instead of partial fill.2) It is 'loud' - clicks as it works. Don't mount in your kitchen. I have no problem with it in the basement3) seems to fill substantially faster. I have not timed it, but just gut check says it's a lot faster (which means less waste).
customer
Reviewed in the United States on April 11, 2012
I just received and installed this pump. It can be heard while it is working but it's not that annoying. It is filling my tanks (13.2 gallons total) very quickly. I have pressure gauges on the incoming water supply and the tank. It would take forever for a 50 GPD watts system to fill the tanks after it gets past 10 PSI. My TDS is reading 3 ppm higher now and I don't know why. I'll know more as it finishes filling the tanks. my TDS with 0 pressure on the membrane is 9-10 ppm and it's 12-14 now. The tanks are still filling.It was a surprise to find out the description does not tell you what comes with this system. I was proactive and went out to an actual store to prepare for installing this on a manifold RO. (its different). I received a 3/8" tee, 3/8" line Stop (for plugging one of the ports which is required for adding this pump to a manifold RO), 2 short lines of 1/4" and 2 3/8" x 1/4" connectors for the permeate connections between the RO and the pump. EVERYTHING you need to install this pump is in the kit.BEWARE: The instructions are from 2004 and not what is on Watts website for installing this pump on a Manifold system. From what I understand, The configuration in the instructions will not work because it would require the finished product to travel backwards through the pump. The most updated instructions are on the Watts Premiere website and it requires plugging one of the ports on the manifold with the included plug and a few inches of 3/8 tubing that you supply.I tested the output while the tanks are still filling. I got 2 GPM from the RO faucet. I've never seen an RO system with that much pressure before. This is worth it for that alone. One of the drawbacks for me with an RO system is you usually get 1 to 1 - 1/2 GPM at the RO faucet when the tank is full and that usually only lasts for the first gallon. Keep in mind 2 GPM is with the tank at 40psi, it will go higher then that with this pump. The pump turns off when the tank pressure equals the drain line pressure which is usually equal to your incoming water pressure.Update:This pump brought my tank pressure to 65 psi. (Line pressure is 68 psi). Water output from the RO faucet was 3 GPM. Filled a gallon jug in 20 seconds. I can't expect any better then that, especially for something so inexpensive compared to a booster / delivery pump that requires no power. The only drawback in I wish it was silent, that would be perfection.I highly recommend this if you are unhappy with your RO's performance / waste water / water usage.
Recommended Products
$28.76
$ 15 .11 $15.11
$51.38
$ 23 .03 $23.03
$53.99
$ 26 .63 $26.63