Your cart is empty.
Your cart is empty.Well water supplies often suffer from low or inconsistent water pressure. Well pumps may not be able to maintain the proper water pressure (60+ PSI) required for an RO filtration system. Even some municipal water systems have unsuitable water pressure. If you live in an apartment or high-rise building your water pressure can fluctuate as water use increases throughout the facility. This may cause your reverse osmosis filter system to stop working or work very poorly. If the water pressure is below 30 PSI, the RO system will divert more water to drain than is necessary. The water purity of the filtered water can also decline because the reverse osmosis membrane cannot function properly. The WECO Booster Pump kit can be used to correct a low-pressure condition or replace a broken booster pump. The booster pump retrofit kit is a direct fit replacement for all undersink reverse osmosis filter systems. The WECO Booster Pump uses a safe low-voltage transformer to provide electric power to the pump. The booster pump increases the incoming water pressure to the ideal 60 PSI. This water pressure level maximizes the number of gallons produced per day while minimizing the amount of waste water sent to the drain.
William D. Ricketts, Sr.
Reviewed in the United States on March 22, 2025
When you go to their website they don't tell you right up front that you need to know the pressure of your RO holding tank, you need to know the size of the input line and the output line, how many gallons per day your RO system produces, whether you are on well water. Once you purchase, you cannot return it. They won't take it back. I don't know how they have any business if they won't take something back. They say it costs them too much money. I don't doubt their pump is good. You need to chat with a representative there before purchasing.
Frequent Buyer
Reviewed in the United States on July 18, 2023
I run a small reverse osmosis system and the pressure to the fridge was to low for the water to run on the door. This unit is plug and play installed in 3 minutes. They recommend installing it before the ro system but i installed it between the ro and the fridge because when the ro system slows down when the filters arent new anymore i still want my fridge water to work. Been working for over a month so far. If it fails ill update.
David F.
Reviewed in the United States on April 3, 2023
Was much quieter than expected, doubles the output of my portable reverse osmosis system.
R Thompson
Reviewed in the United States on September 29, 2022
I'm using this pump in my home RO water purification system. It really works great. It does provide the pressure boost and it runs quietly. Volume of purified water output increased significantly by adding this pump. I bought the 100gpd unit - that is good enough for me. Great unit!
Recommended Products
