Shopping Cart

Your cart is empty.

Your cart is empty.

Aquatec 8800 Booster Pump Kit for up to 200 GPD RO Reverse Osmosis water filtration system for both standard and manifold type systems 8852-2J03-B424 PSW-340 Made in USA

4.4 (6) Write Review
Free shipping on orders over $29.99

$194.39

$ 71 .28 $71.28

In Stock

About this item

  • This pump kit includes Aquatec high flow booster pump 8852-2J03-B424 with heavy duty steel base plate with damper, PSW-340 pressure switch, 110V Transformer, 4 reducer fitting 3/8" to 1/4", detail instructions
  • This pump is designed to increase the water supply pressure to a RO water system. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 200 GPD (gallons per day) RO systems
  • This kit is good for 1/4" OD tubing or 3/8" OD tubing since we include 3/8" to 1/4" reducer fittings for pump and for pressure switch
  • Automatic ON/OFF operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank.
  • This kit DOES NOT come with the optional (ESO) Electric-Shut-Off solenoid valve, so it would rely on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine. But if your existing shut off valve is interfering with the pump then you need to get a ESO solenoid valve with Aquatec plug, 24VAC


Note: All pumps are wet-tested by the manufacturer so there are water inside the pump head, and temporary rubber plugs are used at inlet and outlet to prevent water from coming out or dust from going in.


Michael Mouncey
Reviewed in Canada on March 1, 2024
My well pressure to the Hydrologic RO System was only 35 PSI. It took days to pump 50 gallons thru the system. The CDP8800 brought the pressure up to the desired 60 PSI. It now takes 9.5 hours to get my 50 gallons and the waste water dramatically cut by 1/3. Cant say enough what a stellar product wish I bought this kit 2 years ago!
Tyler
Reviewed in Canada on December 10, 2021
the pump works, I found that's its only adjustable to a minimum of 75ish PSI. one thing that is a real pain is the kit doesn't include mounting hardware, nor does it include the 3/8-1/4 reducer fittings. I had to buy those separate.
jarret rimmer
Reviewed in Canada on November 4, 2021
Item is loud
Pierre C
Reviewed in Canada on January 20, 2021
I did not receive the 3/8" to 1/4" reducer fittings as advertised. Make sure you check the box.
brent benner
Reviewed in Canada on March 8, 2020
Excellent quality will buy again when needed.
Joseph Geller
Reviewed in Canada on December 9, 2020
Common pump issues include burnout with electrical box. Call Watts and find out which product numbers are made in USA vs asia, company admits the quality difference and failure rates